Food processors are convenient pastry chefs and kitchen appliances that are used to mix food much faster than a human could do using bare hands. They are known for making kitchen tasks more efficient. They are also made of different blades, some meant for shredding, grinding food, pureeing, slicing, and many other uses, depending on the chef’s need. That’s why pastry chef appliances repair by professionals is incredibly important!
They also come in different types of shapes, colors, and sizes. But the common feature in every processor is that they have a bowl to store ingredients once processed. Their main parts are the control panel, an electrical plug, and a motor.
This article from Plus Appliance Repair technician in Bolton will guide us further on how food mixers work and how they are repaired for efficient and seamless preparation of mouthwatering foods in case of breakdown.
How Food Processors Work
A food processor performs several duties, such as liquefying food, mixing dough and chops, and preparing dice and slices. It is important to note that their motor is much larger than that of a blender and can take the place of what a blender can do.
They are of two types; the direct drive and the belt drive. A Direct Drive is better equipped with a gear motor that is more reliable and delivers better performance, with a motor underneath the food bowl. A belt drive food processor’s bowl and motor are placed side by side, which connects with the drive belt and wheels. It is, however, recommended to work with a direct drive when looking for an appliance for a pastry chef.
Challenges Experienced with A Food Processor
Just like any other appliance, a food processor can break down. This is not a cause to worry. All you need to do is to identify the problem and work towards repairing the same. Below are common problems and the solutions to repair a food processor.
Faulty Outlet
It is possible that this could be a result of a faulty outlet behind the breakdown of the food processor.
How to fix it? Check on the outlet and confirm if the electric cord is well connected. The motor and the fuse should also be in good order. Unplug the processor from the wall outlet and plug it into a different one, which could solve your problem immediately.
Damaged Power Cord
If the outlet is okay, the next possible reason is a damaged power cord.
The solution is to replace the cord with a new one. After replacement, avoid tangling the cord, or do not press firmly against the wall at odd angles.
Wrong Connectivity of the Wires
At times the food processor can run intermittently. In such a case, check the wire connections, and if faulty, have them repaired or replaced. Correct any tensions in the belt- drive and ensure that they are well adjusted.
Overheating of the Motor
Pastry chefs usually have much to do with the food mixer to meet the client’s demands. They tend to use the processor for extended periods without a stop, which could cause the motor to overheat and, most likely, when using hard ingredients for a long time.
This should not be a cause to worry. The solution is to allow the processor to cool down before picking the next duty.
If possible, have several of them in the chef’s kitchen to give room for cooling down and extend their lifespan.
Motor Turning But Not Working
This is another common challenge experienced in motors. When the motor is turned on, and the blades fail to work, the reason behind the faulty blades is.
The solution is to lubricate the blades or replace them if faulty. On the same note, confirm if the gears are working and replace them if worn out.
Steps Required for Food Processor Repair
At any time, you require to repair a food processor, several tools and items are required. These include:
- wrenches
- multimeters
- pliers/screwdrivers
- lubricant
There are 4 critical steps, mainly;
- Disassembling the food processor. When working on any appliance repair, disconnect the gadget from power connections. One of the best rules of thumb is to use the available instructions for disconnecting the knobs, drive belts, and motor.
- Servicing the processor is all about cleaning the entire processor, replacing any damaged gears, and confirming that they are fully lubricated. This process includes servicing the gear, the belts, and the drive shafts.
- Adjust or replace the food processor drive belt. Loosen the adjusting wheel set screw or nut and adjust the belt tension or, if necessary, replace the belt with a belt of the same size.
- Servicing the drive shaft of the food processor. If it spins easily, it is probably worn and needs to be replaced. Remove the driveshaft, and inspect the old driveshaft for the cause of the problem. Repair or replace if necessary.
Conclusion
Fixing the food processor makes sense, and there is no single time you will be held at a standstill by your customers for failure to deliver. Always ensure it is in its proper working condition.